

Unrivalled Reliability & Feature Packed Systems
Shoregear Applications Available
With ShoreTel's ShoreGear, you have the ability to 'mix and match' adding switches together to reach your required user level. For example, to achieve a system capable of 500 users, ShoreGear will be made up of 5 x 120/24 switches plus one reserve switch. This creates a reserve phone system unlike other leading brands where you would have to buy 2 phone systems; considerably reducing the chances of a system failure.
An advantage with ShoreTel is that you can base switches in different offices as a part of the same system. Offices can be in the UK, or around the world. There really is no limits to this remarkable system.
 |
ShoreGear 120/24
Designed for large offices the 120/24 can be run to support IP or analog phones.
|
This unit supports up to 120 IP phones or 24 analog ports - 8 universal telephone / trunk ports and 16 telephone ports.
The ShoreGear 120/24 interfaces to standard analog trunks using loop start or wink start signaling as well as to standard analog phones including CLASS feature phones with caller ID, name, number and message waiting. |
|
 |
ShoreGear 60/12
Designed for medium sized offices to support both IP or analog phones.
|
Regions where it is more cost effective to use analog trunking rather than digital trunking, the ShoreGear 60/12 can be doubled up to create a powerful combination. For example: 2 voice switches providing 32 user and 16 analog trunks.
The ShoreGear 60/12 offers all the features of the 120/24 ShoreGear but on a smaller scale supporting up to 60 IP phones or up to 12 analog ports - 8 universal phone / trunk ports and 4 phone ports. |
|
 |
ShoreGear 40/8
Designed for the smaller office allowing the support of IP or analog phones.
|
The ShoreGear 40/8 is designed to support 40 IP phones or up to 8 analog ports - 2 universal phone / trunk ports and 4 telephone ports. It shares all of the features of the 120/24 but reduced down to a more cost effective solution for small businesses. |
|
 |
ShoreGear T1
Designed to be used as either a gateway to legacy PBX systems or to provide higher density trunking using T1 or PRI signal
|
|
 |
ShoreGear E1
Designed for the purpose of providing higher density trunking using E1 PRI trunking for international locations. The E1 can also be used as a gateway to legacy PBX international applications.
|